Fujitsu AOTG09LUC Operating Manual Download Page 3

2

SLEEP TIMER

When the SLEEP button is pressed during Heating mode, the 
indoor unit’s temperature setting is gradually lowered during the 
period of operation; during cooling mode, the temperature set-
ting is gradually raised during the period of operation. When the 
set time is reached, the indoor unit automatically turns off.

POWERFUL OPERATION

The product will operate at maximum power, which is convenient 
when you want to quickly cool down or warm up the room.

 Clean function 

MILDEW-RESISTANT FILTER

The Air Filter has been treated to resist mildew growth, thus al-
lowing cleaner use and easier care.

POLYPHENOL CATECHIN AIR CLEANING FILTER

The Polyphenol Catechin Air Cleaning 

fi

 lter uses static electricity 

to clean 

fi

 ne particles and dust in the air such as tobacco smoke 

and plant pollen that are too small to see. The 

fi

 lter contains cat-

echin, which is highly effective against various bacteria by sup-
pressing the growth of the bacteria adsorbed to the 

fi

 lter.

Note that when the Air Cleaning Filter is installed, the amount of 
air produced decreases, causing a slight decrease in the indoor 
unit’s performance.

NEGATIVE AIR IONS DEODORIZING FILTER

It comprises pottery super micro particles which can produce 
negative air ions having the effect of deodorizing and can absorb 
and remit the peculiar smell at home.

 Remote controller

WIRELESS REMOTE CONTROLLER

The Wireless Remote Controller allows convenient control of in-
door unit operation.

WIRED REMOTE CONTROLLER (OPTION)

The optional wired remote controller can be used. When you 

use remote controller, there are following different points as 

compared with using wireless remote controller.
And you can use both wired and wireless remote controller si-

multaneously. (But function is limited)

When the restricted functions on the remote controller are used, 

beeping sound will be heard, OPERATION, TIMER and the 3rd 

lamp of the indoor unit will 

fl

 ash.

[The restricted functions for wireless ones]
• HUMAN SENSOR (ENERGY SAVING)

• 10°C HEAT OPERATION

• OUTDOOR UNIT LOW NOISE OPERATION

• WEEKLY TIMER

• ON/OFF TIMER

• PROGRAM TIMER

• SLEEP TIMER

• POWERFUL OPERATION

 Energy saving and Comfortable function 

INVERTER

At the start of operation, large amount of power is used to 

bring the room quickly to the desired temperature. Afterward, 

the air conditioner automatically switches to a low power set-

ting for economic and comfortable operation.

HUMAN SENSOR (ENERGY SAVING)

When the sensor detects that there is no one in the room, it 

automatically reduces the operating power. It saves you mon-

ey by reducing the power consumed.

ECONOMY OPERATION

When ECONOMY operation mode is operated, the room tem-

perature will be little higher than the set-temp under cooling 

mode and lower than set-temp under heating mode. Therefore, 

the ECONOMY mode is able to save more energy than other 

normal mode.

SWING OPERATION

The Airflow Direction Louvers swings automatically up and 

down so that the air speeds to every nook and corner of your 

room. 

AUTO CHANGEOVER

The operation mode (cooling, dry, heating) is switched auto-

matically to maintain the set temperature, and the temperature 

is kept constant at all times.

SUPER QUIET OPERATION

The indoor unit’s air

fl

 ow is reduced to produce quieter operation.

10 °C HEAT OPERATION

The room temperature can be maintained at 10 °C so as to 

prevent the room temperature from falling too far.

OUTDOOR UNIT LOW NOISE OPERATION

OUTDOOR UNIT LOW NOISE operation mode reduces the 

noise level of the outdoor unit by suppressing the fan speed 

and the rotation number of the compressor. It is effective when 

the surrounding area is quiet, such as in the night.

 Convenient function 

WEEKLY TIMER

The combination of the temperature setting and the timer func-

tion, which you can choose any day between Monday and 

Sunday, can be set freely.
You can set up to four ON Timers or OFF Timers in one day.

PROGRAM TIMER

The program timer allows you to integrate OFF timer and ON 

timer operations in a single sequence. The sequence can 

involve 1 transition from OFF timer to ON timer, or from ON 

timer to OFF timer, within a 24 hour period.

FEATURES AND FUNCTIONS

9319356020_OM_EN.indd   2

9319356020_OM_EN.indd   2

7/18/2011   1:39:03 PM

7/18/2011   1:39:03 PM

Summary of Contents for AOTG09LUC

























Reviews: