- (01 - 39) -
D
U
C
T T
YP
E
AR
G
12
-1
8L
L
D
U
C
T T
YP
E
AR
G
12
-1
8L
L
(5) Press the TIMER SET button to confirm the setting. Press the TIMER SET button for a few seconds until the setting value stops
flashing. If the setting value display changes or if “- -” is displayed when the flashing stops, the setting value has not been set correctly.
(An invalid setting value may have been selected for the indoor unit.)
(6) Repeat steps 2 to 5 to perform additional settings. Press the set temperature buttons ( ) ( ) and fan control button simultaneously
again for more than 5 seconds to cancel the function setting mode. In addition, the function setting mode will be automatically canceled
after 1 minute if no operation is performed.
(7) After completing the FUNCTION SETTING, be sure to turn off the power and turn it on again.
!
CAUTION
• After turning off the power, wait 30 seconds or more before turning on it again. The FUNCTION SETTING doesn’t become
effective if it doesn’t do so.
Summary of Contents for AO G12LALL Series
Page 2: ...1 INDOOR UNIT DUCT TYPE AR G12LLTB AR G14LLTB AR G18LLTB DTR_AR054E_01 2011 12 05 ...
Page 47: ...2 OUTDOOR UNIT SINGLE TYPE AO G12LALL AO G14LALL AO G18LALL DTR_AO099E_01 2011 12 05 ...
Page 61: ... 02 13 OUTDOOR UNIT AO G12 18LA OUTDOOR UNIT AO G12 18LA SOUND LEVEL CHECK POINT 88888 ...