23
Removing the Antenna
1.
See “Removing the Battery” on page 5
2.
See “Removing the Wireless LAN Board” on page 8 to disconnect the RF cables.
3.
See “Removing the Middle Cover” on page 11
4.
See “Removing the Keyboard” on page 12
5.
See “Removing the LCD Module” on page 17
6.
See “Removing the LCD Bezel” on page 18
7.
See “Removing the Inverter Board” on page 19
8.
See “Removing the Hinge” on page 20
9.
See “Removing the LCD” on page 21
10. Remove the two screws as shown and release the RF cable to remove the main antenna.
NOTE: When installing, make sure to route the RF cable well as shown.
11. Remove the two screws as shown and release the RF cable to remove the aux antenna.
Step
Size (Quantity)
Color
Torque
1
M2 x L3 (2)
Silver
1.6 kgf-cm
