En-2
(1) Intake grille
(2) MANUAL AUTO button: This is used to operate it while remote
controller is not available.
(3) Front panel
(4) Human censor
(5) Vertical air
fl
ow direction louver
(6) Power diffuser
(7) Remote Control Signal Receiver: This is the place to receive the
signals from the remote controller.
(8) FILTER Indicator Lamp (red): It lights on if the
fi
lter became dirty.
Clean the
fi
lter referring to “CLEANING AND CARE”. It lights off
when RESET button is pressed after cleaning.
(9) TIMER Indicator Lamp (orange): It lights on while timer is working.
(10) OPERATION Indicator Lamp (green): It lights on while operating.
(11) Drain Hose
(12) Air cleaning
fi
lter
(13) Air Filter
(14) Horizontal air
fl
ow direction louver (behind Vertical air
fl
ow direction
louver)
Control unit (optional)
Types of remote controllers:
●
Wireless remote controller
●
Wired remote controller
●
Simple remote controller
For operation method, please refer to the Operating Manual of each
device.
MANUAL AUTO OPERATION
Use the MANUAL AUTO operation in the event the remote control unit is
lost or otherwise unavailable.
CAUTION
Do not press the MANUAL AUTO button with wet hands or pointed ob-
jects, otherwise an electric shock or malfunction may occur.
Starting Operation
Press the MANUAL AUTO button on the operating
control panel.
The operation can be set in the following setting.
Operating mode
AUTO:
When Auto mode cannot be selected, it will
operate in the same mode as the other indoor
unit in the same system. (When other indoor
unit in the same system doesn’t operate, the air
conditioner will operate in cooling.)
Fan speed
AUTO
Setting temperature
23 °C
Stopping Operation
Press the MANUAL AUTO button on the operating
control panel.
AIRFLOW DIRECTION
Vertical air
fl
ow direction
The vertical wind direc-
tion can be controlled
with the remote control-
ler.
Cooling and Dry
Heating
1
2
3
4
1
2
3
4
Horizontal air
fl
ow direction
The horizontal
air
fl
ow direction can
be manually set by
adjusting Horizontal
air
fl
ow direction
louvers.
Knob (2 places)
Louvers
Knob
HUMAN SENSOR
About the human sensor
The Human sensor detects whether there are people in the room by
looking for movement by people in the room.
Setting of Human sensor can be done in the remote controller of the fol-
lowing. Refer to the operating manual of the remote controller.
●
UTY-RNR*Z* (wired remote controller)
About the Auto saving operation
If no one enters the room during the set time (15, 30, 60, 90, 120, 180
minutes), the set temperature will be automatically controlled.
(When someone comes back into the room, the Human sensor will de-
tect this, and automatically revert to the original settings.)
About the Auto off operation
If no one enters the room during the set time (1 to 24 hours in 1 hour
increments), the air conditioner will automatically stop operation.
NOTES:
●
To restart operation, press the [On/Off] button of the remote controller.
●
The Auto off operation may not operate even if there is no one in the
room. The sensor may incorrectly detect people even if there is no one
in the room.
Application range
Vertical angle 90° (Side view)
Horizontal angle 100° (Top view)
90°
7 m
50°
50°
7 m
9377772404_OM_9L.indb 2
9377772404_OM_9L.indb 2
2019/2/1 13:55:36
2019/2/1 13:55:36
