En-10
WARNING
Never place fi ngers or foreign objects inside
the outlet ports, since the internal fan operates
at high speed and could cause personal injury.
●
Attempting to move up/down air direction
louvers or left/right air direction louvers
manually could result in improper
operation; in this case, stop operation
and restart. The louvers should begin to
operate properly again.
●
During use of the Cooling mode and the
Dry mode, do not set the up/down air
direction louvers in the Heating mode
range (
4
to
5
) for long periods of time,
since water vapor may condense near
the outlet louvers and drops of water may
drip from the air conditioner. During the
Cooling mode and the Dry mode, if the
air direction louvers are left in the Heating
mode range for more than 30 minutes,
they will automatically return to position
3
.
●
When used in a room with infants,
children, elderly or sick persons, the air
direction and room temperature should
be considered carefully when making
settings.
Instructions relating to heating (*) are applicable only to Heating and Cooling model (Reverse Cycle).
●
Adjust the up, down, left and right air directions with the “SET” buttons on the remote controller.
●
Use the “SET” buttons after the indoor unit has started operating and the air direction louvers have stopped moving.
Vertical air direction adjustment
Press the “SET” button (Vertical).
Each time the button is pressed, the air direction range will change as follows:
1
2
3
4
5
Types of Airfl ow Direction Setting:
1
,
2
,
3
: During Cooling mode/Dry mode
1
,
2
,
3
,
4
,
5
: During Heating mode*
The remote controller display does
not change.
●
Use the air direction adjustments within the ranges shown above.
●
The vertical airfl ow direction is set automatically as shown, in accordance with the
operating mode selected.
Horizontal fl ow
1
: During Cooling mode/Dry mode
Downward fl ow
5
: During Heating mode*
●
During the Auto mode operation, for the fi rst minute after beginning operation, airfl ow
will be horizontal
1
; the air direction cannot be adjusted during this period.
Horizontal air direction adjustment
Press the “SET” button (Horizontal).
Each time the button is pressed, the air direction range will change as follows:
1
2
3
4
5
The remote controller display does not change.
●
Use the air direction adjustments within the ranges shown below.
1
2
3
4
5
1
2
3
4
5
Left/right air direction louvers
ADJUSTING THE DIRECTION OF AIR CIRCULATION
9374379736-03_OM.indb 10
9374379736-03_OM.indb 10
03-Jul-18 13:09:15
03-Jul-18 13:09:15
