Fujitsu A9Z111E1014A2001 Operating Manual Download

Page: 46 / 91

Working with the notebook

SIM card

A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or
notebook to enable access to a mobile radio network in conjunction with an installed UMTS module.

Follow the instructions supplied by the provider of the SIM card.

The SIM card slot is located in the battery compartment and can only
be accessed when the battery is removed.

Inserting the SIM card

►

Prepare for insertion of the SIM card, see chapter

"Preparing to remove components", Page 58

►

If necessary, open the clip (a) of the SIM card.

►

Slide the SIM card into the slot (1)
until it engages, as shown in the
battery compartment.

►

Slide the SIM card lock (a) in the
direction of the arrow (2).

►

Complete the insertion, see chapter

"Finishing component removal", Page 65

Removing a SIM card

►

Prepare for removal of the SIM card, see chapter

"Preparing to remove components", Page 58

►

Slide the SIM card lock (a) in the
direction of the arrow (1).

►

Press on the edge of the SIM card so that
it jumps up slightly out of the slot.

►

Pull the SIM card out of the slot in the
direction of the arrow (2).

►

Complete the removal, see chapter

"Finishing component removal", Page 65

Fujitsu Technology Solutions

Summary of Contents for A9Z111E1014A2001




























































































Search results

Summary of Contents for A9Z111E1014A2001

Reviews:

Related manuals for A9Z111E1014A2001

Brands by name

Popular brands

Fujitsu A9Z111E1014A2001, Operating Manual

Search results

Summary of Contents for A9Z111E1014A2001

Reviews:

Related manuals for A9Z111E1014A2001

Brands by name

Popular brands