Fujitsu 5000 Series User Manual Download

Page: 50 / 82

Attach the front panel.

Remove the blank panel for a 3.5-inch

expansion bay from the rear side of the front

panel as required in the arrow direction shown

in the figure.

Attach the upper cover.

Use BIOS setup to configure the internal

option.

To configure the installed IDE-standard internal

option, use the main menu of BIOS setup (

see "Main Menu,""BIOS Setup").

Point

To remove the internal option, reverse the above procedure.

Point

BIOS Setup

A guide to your Deskpower 5000 BIOS is available online. Please visit our technical support

section at www.fujitsu-pc-asia.com. Once there, click on the desktop series from the pull down

menu and select the appropriate desktop model.

3-inch blank panel

Hook
Bend the
hook inward.

Rear of
the panel

Summary of Contents for 5000 Series



















































































Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands

Fujitsu 5000 Series, User Manual

Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands