Fujitsu 5000 Series User Manual Download Page 49

Page: 49 / 82

Connect the flat cable.

Connect the flat cable that is appropriate for the

internal option to be installed.

- To install two IDE-standard internal options to

the IDE secondary cable (if one of the options
is a hard disk), install the hard disk at the
master side.

- To install a SCSI interface internal option:

Connect the flat cable to the SCSI card in the

expansion slot.

- To install a floppy disk drive:

Connect the flat cable to the expansion card

of the internal floppy disk drive in the
expansion slot.

Connect the power cord.

Connect the unused power cord to the

connector of the installed internal option.

Connected to the riser board

Connected when set to the slave

Connected when set to the master

SLAVE

MASTER

Blue or red line

Pin 1

Summary of Contents for 5000 Series



















































































Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands

Fujitsu 5000 Series, User Manual

Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands