En-14
CLEANING AND CARE
CAUTION
3. Re-attach the air filters to the intake
grille.
The air filters fit onto the inside of the intake grille.
●
Dust can be cleaned from the air filter either with a
vacuum cleaner, or by washing the filter in a solution
of mild detergent and warm water. If you wash the filter,
be sure to allow it to dry thoroughly in a shady place
before reinstalling.
●
If dirt is allowed to accumulate on the air filter, air flow
will be reduced, lowering operating efficiency and
increasing noise.
Cleaning the Air Filter
1. Pull the air filters upward to remove
them.
Remove the air filters by raising its handle while pulling it
out towards you.
2. Clean the air filters.
Remove the dust from the air filters by vacuuming or wash-
ing them. After washing, allow the air filters to dry thoroughly
in an area protected from sunlight.
Air filter
●
To avoid excessive wear of the part and components or malfunctioning of the air conditioning, the user/consumer shall perform
preventive maintenance through an accredited technical assistance, periodically. To know the preventive maintenance periodic-
ity, the consumer shall check with the accredited installer or an accredited technical assistance.
●
When used for extended periods, the unit may accumulate dirt inside, reducing its performance. We recommend that the unit be
inspected regularly, in addition to your own cleaning and care. For more information, consult authorized service personnel.
●
It is recommended for the user/consumer to demand a copy of the Work Order every time there is a visit of a technical assist-
ance for verification, maintenance, test or repair of the product.
●
When cleaning the unit’s body, do not use water hotter than 40 °C, harsh abrasive cleansers, or volatile agents like benzene
or thinner.
●
Do not expose the unit body to liquid insecticides or hairsprays.
●
If the unit will not be operated for a period of one month or more, be sure to allow the inner parts of the unit to dry thoroughly,
in advance, by operating the unit in fan mode for half a day.
●
Before cleaning the air conditioner, be sure to turn it off and turn off the electrical breaker.
Filter Reset (ECONOMY indicator lamp flashing/The special setting)
●
Can be used if set correctly during installation.
Please consult authorized service personnel when using this function.
• It lights on when it is time to clean the air filters.
After turning the power on, press the MANUAL AUTO button for 2 seconds or less on the indoor unit.
9374379590-02_OM_en.indb 14
22/2/2556 17:02:52
