LCD monitor 3816 FA
8 - English
A26361-K882-Z100-5-5E19
The data cable has a 15-pin D-SUB connector or a 24-pin DVI-D connector for connection to a
computer.
Ê
First insert the data cable connector through the hole in the monitor base (d) and then connect
it to the active monitor connection of the computer.
Ê
Connect the data cable connector to the corresponding connection socket (a or b) of the
monitor and secure the connector by tightening the locking screws.
i
If your computer has two monitor ports ("onboard" screen controller and separate
graphics card), the monitor port for the separate graphics card is usually active.
Ê
Pull the display of the monitor up and turn the display by 90° into the vertical position (portrait
mode).
Ê
Connect the power adapter cable of the power adapter firmly to the power connector of the
monitor (1) and check whether the socket is securely seated.
Ê
Connect the power cable to the power adapter (2).
Ê
Depending on the version, plug the plug of the power cable into the monitor mains outlet of the
computer or into a properly grounded mains outlet (3).
Ê
Plug the power connector of the computer into a properly grounded mains outlet.
i
When you start working with your monitor for the first time you should install the
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.
Anti-theft protection
A lock (Kensington Lock) can be mounted in the security slot (c) to protect the monitor from theft. A
Kensington Lock is not included in the consignment of the monitor.
Height adjustment and ability to turn
2
1
Summary of Contents for 3816 FA
Page 2: ......
