Copyright Fujitsu Australia Ltd and its licensors © 2007
13
4. FAQ (Trouble Shooting) :
1). No image, no LED display
Check the power supply of monitor, such as AC adapter, AC power outlet, DC \
power connection.
2). No image, LED is orange color
Check input signal sources and its cables, or if the monitor is at standby status.
3). Prompt “Input Not Supported” or “Out Of Range”
Check the resolution of the PC VGA output. We recommend the resolution is not
higher than XGA 75Hz (for 15” monitor) and no higher than SXGA 75Hz (for 17” and
19” monitor). The optimum vertical refresh frequency of LCD is 60Hz.
4). Image position is not right
Do the “Auto Config” or manually adjust the image.
5). There are “water wave”, “twinkling point”, or incorrect colour on the screen
Check the cable of input signal source and the quality of that signal source
6). The volume of speaker is too low or noisy.
Check the volume value, increase the volume via adjusting the OSD menu, and
check the sound source quality.
7). No sound
Check the sound is mute or not.
