Downloaded from Projector.com
XP50
Projector
18 - English
A26361-K830-Z100-1-5E19
Operating the OSD menu with the remote control
Activating the OSD menu
Ê
Press the "Menu" button on the remote control.
The basic menu is displayed.
Marking a function or submenu
Ê
Use the ball on the remote control to move the selection (up/down) to the desired function or
submenu.
Selecting a function or submenu
Ê
Press the "Select" key.
The submenu opens, or you can make the desired settings.
Setting a function
Ê
Move the ball left or right until the setting is correct.
If the function can only be activated or deactivated:
Ê
Select the desired function and activate it by pressing the "Select" button.
Saving setting and terminating OSD menu
Ê
Press the "Menu" button on the projector.
i
If you do not make a selection for about 40 seconds, the OSD menu closes, and the set
value is stored.
Returning to the previous menu
Ê
Roll the ball to the left.
Returning to the higher-level menu
Ê
If you want to return to the higher-level menu, select the adjacent symbol and
confirm your selection with the "Select" button.
Basic menu
When you press the "Menu" button on the projector or the remote control, the basic menu appears.
With the basic menu, you can set contrast, brightness, colour and
keystoning or switch to the setup menu.
