Downloaded from Projector.com
XP50
Projector
10 - English
A26361-K830-Z100-1-5E19
Connecting the data cable
Ê
Use the data cable from the accessories that matches your computer's monitor port (VGA or
DVI).
Ê
Connect the appropriate connector of the data cable to the active monitor port on the computer
and secure the plug-in connection by tightening the safety screws.
i
If your computer has two monitor ports ("onboard" screen controller and separate
graphics card), the monitor port for the separate graphics card is usually active.
Ê
Connect the other end of the cable to the DVI connector (2) at the back of the projector.
Connecting the USB cable
The projector has a USB output (1). If your computer has a USB port and a driver for a USB mouse
is loaded, you can control the computer with the projector’s remote control as with a mouse.
Proceed as follows:
Ê
Insert the USB cable’s connector into the USB port on the computer (consult your computer’s
manual).
Ê
Insert the other end of the USB cable into the USB port (1) at the back of the projector.
Connecting the projector to the video adapter
You can use the projector to project video images, for example, from a video recorder or a
camcorder. To do this, you must use the video adapter included.
