manualshive.com logo in svg

Fujitsu Siemens Computers SCENICVIEW A17-3A, Operating Manual

Share
Download
Fujitsu Siemens Computers SCENICVIEW A17-3A Operating Manual Download Page 31

 SCENICVIEW 

A17-3A/A19-3A 

A26361-K1159-Z120-1-7619, edition 1 

23 

 

Having this problem? 

Check the following points: 

Picture is shaking 

►

 

Check that the data cable for the monitor is firmly 
attached to the monitor port on the computer. 

►

 

Adjust the monitor automatically (using the AUTO 
button - if provided - or using the OSD menu). 

Picture disturbances (vertical lines) 

 

►

 

Adjust the monitor automatically (using the AUTO 
button - if provided - or using the OSD menu). 

Picture disturbances (horizontal lines, 
picture noise) 

 

►

 

Adjust the monitor automatically (using the AUTO 
button - if provided - or using the OSD menu). 

The screen becomes darker 

►

 

Adjust the monitor automatically (using the AUTO 
button - if provided - or using the OSD menu). 

►

 

If the auto-adjustment function does not give 
satisfactory results, set the contrast and brightness 
correctly using the OSD menu. 

 

Summary of Contents for SCENICVIEW A17-3A




































Reviews:

No comments

Brands by name

Popular brands

Load more brands