manualshive.com logo in svg

Fujitsu Siemens Computers SCENICVIEW A17-3A, Operating Manual

Share
Download
Fujitsu Siemens Computers SCENICVIEW A17-3A Operating Manual Download Page 22

SCENICVIEW A17-3A/A19-3A 

 

14 

A26361-K1159-Z120-1-7619, edition 1 

Adjusting portrait format 

The monitor can be turned from the "wide format" (landscape mode) into the "high format" position 
(portrait mode). 

►

 

Grasp the monitor with both hands on the right and left edge of the casing, move it into the 
highest position and turn it clockwise until it is in the portrait position. 

 

i

 

In order for the screen to also display correctly in portrait mode, this mode must either be 
supported by your graphics card or a special software application must be used. 

 

►

 

In the OSD menu you have the option of switching the OSD manually from landscape mode 
into portrait mode (see section "Monitor settings using the OSD menu"). 

To reset the monitor to the landscape mode, the monitor must be turned counter-clockwise. The 
OSD display can be reset again in the OSD menu. 

Switching the monitor on/off 

The ON/OFF switch at the front is used for switching the monitor on and off.  

 

 

1 =  Buttons for the OSD menu 

(On-Screen-display) 

2 =  ON/OFF switch 
3 =  Power indicator 

 

i

 

The buttons are to be pressed from the bottom upwards. 

 

The power indicator (3) lights up blue when the monitor and computer are switched on. The power 
indicator lights up orange when the monitor does not receive a video signal or is in the energy saving 
mode. The power indicator goes off when the monitor is switched off. 
When you switch the computer system on, you must proceed in the following order: 

►

 

First switch on the LCD monitor with the ON/OFF switch (2). 

►

 

Then switch on the computer. 

 

Summary of Contents for SCENICVIEW A17-3A




































Reviews:

No comments

Brands by name

Popular brands

Load more brands