U41270-J-Z916-2-76
45
PRIMESTATION as LAN Console
Configuration
mklancon - Create LAN Console configuration entries
Syntax:
mklancon [
-t <
RCA Type>
]
<RCA SystemName >
<
RCA PortNumber>
<
ConsoleName>
The command arguments determine the RCA port for which a configuration
entry is to be generated.
-t RCA Type
The permitted values are “3” and “4” for the RCA3 or the RCA4. If the
t
argument is not specified, a configuration entry is created for the RCA3.
RCA SystemName
The system name of the required RCA.
RCA PortNumber
A unique TCP/IP port number, which is served by the RCA. The port
number must be in the following valid range for the RCA type:
–
RCA3: from 3001-3006
–
RCA4 (16 ports): from 3001-3016
or
admin
–
RCA4-8: from 3001-3008
or
admin
ConsoleName
The symbolic system name that is going to be used. This name must not
exist already. It has a maximum length of 14 characters and it must
consist of alphanumeric characters only.
The RCA system name should always be input in a uniform way, i.e. always
either with or without a domain suffix (e.g.
utopia
, not
utopia.xxx.xxx.de
) in order
to avoid ambiguities with the
rmlancon
and
showlancon
commands.
If the port number
admin
is entered for the RCA4, a configuration entry is
created for administering the RCA4, see also “Configuring the RCA” on
page 47.
To execute the command for an RCA3, a password has to be assigned for the
specified RCA port.
If a configuration entry is created first of all for an RCA type, the RTTY monitor
lanconsole
is created for the RCA3 and the RTTY monitor
lanconsole1
for the
RCA4.