Getting started
Switching on the device (without main power switch)
►
Press the ON/OFF switch on the front of the device.
The power-on indicator lights green and the device is started.
Installing the software
Con
fi
gure the server and install the desired operating system and applications.
This can be done in one of the following ways:
•
Remote con
fi
guration and installation with ServerStart:
The included "ServerStart" CD makes it easy for you to con
fi
gure the server
and then install the operating system.
•
Local con
fi
guration and installation with or without
ServerStart
(see
"Con
fi
guring with ServerStart
or EasySetup", Page 23
or
"Con
fi
guration without ServerStart", Page 23
).
Installation with ServerStart
►
Switch the device on.
►
Place the "ServerStart" CD or an installation disk in the corresponding drive.
►
Follow the instructions on the screen (see
"Con
fi
guring with ServerStart or EasySetup",
Page 23
or
"Con
fi
guration without ServerStart", Page 23
).
For instructions on how to operate
ServerStart
and further information, refer to the
"ServerView Suite - ServerStart" manual supplied as a PDF
fi
le.
For advice on con
fi
guration, see
"Con
fi
guring with ServerStart or EasySetup", Page
23
. If the device is integrated into a network, the user and server details as well
as the network protocol are required during the software installation.
For further information about the device and its drivers, utilities and
updates please refer to the "Drivers & Utilities" DVD or visit our website
at
"http://www.fujitsu-siemens.com/support"
.
18
A26361-K1182-Z120-1-7619, edition 3
