C Series
A26391-K110-Z100-2-7619
English - 11
The notebook switches off
You have defined a time limit in the "Power" menu in BIOS Setup that is insufficient for your
needs.
To run the
BIOS Setup
you must reboot your notebook.
Ê
Press the Suspend/Resume button to reboot the notebook.
Ê
When the text
<ESC> Diagnostic screen <F12> Boot Menu <F2> BIOS Setup
appears, press the
[F2]
key immediately.
Ê
Correct the time limit in the
Power
menu in the
BIOS Setup
.
If you are operating the notebook with a battery, you may have overlooked the reference to
the low battery level and the notebook has switched over to Standby mode.
Ê
Connect the power adapter.
Ê
Press the Suspend/Resume button.
The battery indicator appears
The battery is dead.
If the battery display
appears, the battery is not charged.
Ê
Charge the battery.
If this does not succeed, you must change the battery for a new one. When you dispose of used
batteries, please observe the safety instructions in the "EasyGuide" manual.
The battery discharges too quickly
The battery is either too hot or too cold. In this case the battery indicator flashes.
Ê
Bring the notebook up / down to a normal temperature again.
If the operating time of the battery mode is extremely short, the battery is probably old and should
be replaced.
You may have an application running that consumes a great deal of power due to frequent
accessing of the hard disk or CD-ROM drive.
Ê
Use the power adapter as frequently as possible.
The maximum brightness may have been set for the screen.
Ê
Set the screen somewhat darker with the key
[Fn]
and the key
[F6]
to reduce the power
consumption.
The power-management features have been deactivated.
Ê
Check the settings in the
BIOS Setup
(in the
Power
menu), and adjust the parameters.
Downloaded from LpManual.com Manuals
