Add-on modules / Upgrading
D1859 (Econel 50)
27
BIOS Recovery - Recovering System BIOS
i
All BIOS settings are reset to the default values.
►
Open the casing as described in the operating manual.
►
On
the
system board
set the jumper to the appropriate setting to restore the system BIOS (see
chapter "Jumper settings").
►
Close the casing as described in the operating manual.
►
Insert a BIOS update floppy disk and start the server.
►
Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you
hear the signal sequence "short-short- long- long- long" and the diskette access indicator is
dark. This can take a few minutes.
►
Open the casing as described in the operating manual.
►
Restore the switch or jumper settings.
►
Close the casing as described in the operating manual.
►
Remove the floppy disk from the drive.
►
Start the server and invoke
BIOS Setup
.
►
Select the menu item
Reset Configuration
in the menu
Advanced
and change the setting to
Yes
.
►
Save the change and terminate
BIOS Setup
.
The BIOS recovery has now been completed. The system restarts.
i
Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"
("ServerBooks" CD).
Summary of Contents for D1859-A
Page 1: ...Technical manual System board D1859 Econel 50 English reliability2 ...
Page 4: ......
Page 6: ......
