Fujitsu Siemens Computers CELSIUS R, Operating Manual

Page: 14 / 70

Preparing for use
6
A26361-K680-Z101-1-7419
Setting up the workstation
!
When installing your workstation, give consideration to the recommendations and safety
notes in the "Safety and Ergonomics" booklet.
Set up the workstation only in its correct orientation. The points to observe are illustrated
on the following pages.
We recommend that you place your device on a surface with good anti-slip qualities. In
view of the multitude of different finishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Do not expose the workstation to extreme environmental conditions (see "Technical data"
chapter).
Provide at least 200 mm of clearance in front of and behind the fan area of the casing to
ensure adequate ventilation. In order to avoid overheating, do not cover the ventilation
area of the monitor or the workstation.
Do not place several workstations one above the other.
Connect the monitor, mouse and keyboard
The ports for the monitor, mouse, and keyboard are on the rear and front (USB ports, optional) of
the workstation.
Keyboard port / purple PS/2 mouse port / green
Monitor port / blue USB port / black
Connecting the monitor
► Follow the instructions contained in the monitor manual to prepare the monitor for operation
(e.g. connecting cables).
► Plug the data cable into the monitor port of the workstation.
► Plug the monitor power cable into the grounded mains outlet.
i
The monitor will not be switched off together with the system. Switch off the monitor with
ist own ON/OFF switch.