
Removing and installing components when performing service
58
10600605407, edition 1
Mounting the cover
1
2
►
Place the cover on its mounting location (1).
►
Fasten the cover with the screw (2).
►
Replace the battery (see "Inserting battery ").
►
Turn the notebook over and place it on a flat surface.
►
Reconnect the cables that you disconnected before.
Removing and installing SATA hard disk
If you are asked by the Hotline/Help Desk to remove and install the SATA hard disk yourself,
proceed as follows:
►
Switch the notebook off and pull the power plug out of the mains socket.
►
Close the LCD screen so that it locks into place.
►
Disconnect all cables connected to the notebook.
►
Turn your notebook over and place it on a stabile, sturdy, flat surface. If necessary, lay an anti-
slip cloth on this surface to prevent the notebook from being scratched.
►
Remove the battery (see "Removing battery").
Removing cover
2
1
►
Remove the screw (1).
►
Pull the cover (2) off the notebook.