2-3. Main unit internal section
⑤ Rotating drum
The hopper side of the drum rotates,pick up the separate screws and supplies them to the chute.
⑥ Chute
The chute supplies screws from the hopper to the escapement where they are aligned.
⑦ Hopper
Screws are separately dumped and stored here.
⑧ Impeller
This gear rotates on the chute to prevent non-aligned screws from entering.
⑨ Screw head guide
This plate prevents screws on the chute from jumping outwards or falling.
⑩ Motor gear head
The motor gear head turns the rotating drum.
⑪ Air unit
This unit includes the filter, pressure-relief valve and oiler.
⑫ Solenoid valve
Switches the air path to the escapement and operates in synchronization with the screw feed signal.
⑬ Optical sensor switch
This sensor temporarily stops the rotating drum when a specified quantity of screws is aligned.
⑭ Escapement
This sorts one screw at a time on the chute, and pressure-feeds them along the screw feed hose to
a specified position.
⑰ Screw feed hose
This hose feed the screws from the escapement to a specific location.
Screw Fastener.
⑯ Receptacle
This is a metal outlet (3P socket) for the screw-feed external input signal.
⑰ Bulhead union connector
This is an air source fitting (KQ2E08-00) for the air driver.
⑬
Optical sensor switch
⑭
Escapement
⑮
Screw feed hose
⑯
Receptacle
⑰
Bulkhead union connector
⑫
Solenoid valve
⑪
Air unit
⑩
Motor gear head
⑨
Screw head guide
⑧
Impeller
⑦
Hopper
⑥
Chute
⑤
Rotating drum
- 6 -
