Fujioh FV-EL51, Operating & Installation Manual, Page: 8 / 36

ISet the desired cooking function.
Cooking will start and stop when the set buzzer time has passed (in this case 2h and 15’).
If you do not wish to start cooking immediately, you can program the time in which you want cooking to end.
After having set the duration of cooking as previously explained, press MENU 3 times entering the cooking end function.
Example: We want the food to be cooked at 20:45:
2) Press + or – to program the time for the end of cooking (fig. 16).
1) Press MENU 3 times until “End” and the time of the end of cooking appear on the screen. In the example, the time for the end of cooking will be:
(18:30 + 2:15 = 20:45) (fig. 15)
3) After a few seconds the actual time will appear on the screen. (fig. 17).
Example recapitulation:
Having programmed the timer so that the food is ready at 21:30 and since the duration of 2h 15’ was previously set, cooking will begin at 19:15,
it will last 2 hours and 15 minutes and it will end at 21:30.
The figure 18 shows how the screen is displayed when cooking starts
The figure 19 shows how the screen is displayed when cooking ends
The timer blocks the oven until entering manual setting mode (see paragraph 3.2.1)
The buzzer will ring for 7 minutes if it is not deactivated by pressing any button.
(fig.14).
3.2.5 End of cooking
3 types of different tones can be selected:
1) Maintain the button pressed to listen to the pre-defined tone;
2) Release the key and keep it pressed again to listen to the successive tone;
3) The last tone you will listen to will remain set/memorised until it is reprogrammed.
INSTRUCTIONS FOR THE USER INSTRUCTIONS FOR THE USER
6