Fujioh FSR-3000S, Operation Manual

Page: 8 / 24

8
Re-assembly will be done by following the opposite ways of disassembly procedures
described in Item “Disassembling”.
(1) Make sure that the filter, Rectifier Baffle Panel, oil catch tray, etc. are fixed in the
appropriate positions firmly.
(2) Make sure that there is no abnormal vibration sound when running.
Re-assembling
2
Rectifier Baffle Panel
Wash the Rectifier Baffle Panel in tepid water
with a neutral detergent dissolved, then after
washed in water, wipe it off thoroughly with a
dry cloth.
3
Range Hood Body
After wiping the range hood body off with a
cloth immersed in a neutral detergent and
wring tightly, wipe off moisture thoroughly with
a dry cloth.
1
Remove the Rectifier Baffle Panel (refer to
“Disassembling” ).
NOTE: As the panel may be grease built-up,
be careful when removing it.
2
Replace the light bulb to a new one.
3
Fasten the two screws firmly after re-
assembling the Rectifier Baffle Panel.
Two 60 W light bulbs can be mounted to this range hood.
Prior to replacing the light bulb, purchase a halogen or ordinary mini-light bulb (in the
base diameter 26 mm), rated 120 V - 60 W or below.
Replacing the Light Bulb