13
Maintenance
1F02 2181
Install all parts using the opposite procedure as that for removing the parts.
Caution for Maintenance
Oil Tray
Detaching
/
Attaching Cleaned Parts
Maintenance
Clean the cooker hood as many times as possible (especially, clean the filter once every month) as it
will become very dirty. For a family size of 4 to 5 people and cooking twice a day, clean the filter once
every two weeks. If the cooker hood is left unattended for a long time, much oil is accumulated and it will
become difficult to remove the hardened grease.
• Before cleaning the cooker hood, be sure to disconnect the power plug from the receptacle,
or turn off the breaker.
• For safety, always wear a pair of rubber gloves while cleaning the filter, etc.
• Especially, be careful to prevent electric parts such as the motor, switch, connectors or the
like from being splashed with water.
• Do not spray liquid of any type detergent to the electric parts. It’s cause trouble.
• Do not use solvents such as thinner, benzine, polishing powder or the like for cleaning the
painted surfaces, facing plates, etc. as these parts may become lusterless or scored.
• Do not wash parts with a hard brush or the like for cleaning as it can be damaging.
Note
Oil may not collect in the short period of time depending on oil
cooking frequencies (it's not defects or failure).
Oil tray
Oil tray
Guide
Attaching
Align both sides of the oil tray with the installation section guides
while pushing in the tray until it is completely inserted.
Detaching
Firmly lift up on both sides of the oil tray and pull straight out
while keeping it level.
