12
Installation
1) Please install the oil tray matched with the product.
2) Turn the breaker to on and start the test operation. Turn on a breaker and check operation.
•
Check that the fan rotates normally at all speeds during operation.
•
Check that there are no abnormal sound or vibration.
Operation Check
9) Rectifier panel installation.
Securely hang the hanging brackets found on the
upper side of the rectifier panel onto the hooking
brackets of the main unit. The rectifier panel will be
secured to the main unit when it is pressed against
the two magnets located at the bottom of the main
unit.
Rectifier panel
Magnet
Hooking
bracket
Hanging bracket
8) Attach the oil tray as before.
Align both sides of the oil tray with the installation
section guides while pushing in the tray until it is
completely inserted.
Oil tray
Guide
Note
Oil may not collect in the short period of time depending
on oil cooking frequencies (it's not defects or failure).
Note
Make sure that the rectifier panel is locked securely.
It may be a cause of dropping if not locked firmly.
