Fujioh FR-HT2190V, Operating & Installation Manual

Page: 10 / 46

8
HINTS FOR EXHAUST DUCT INSTALLATION
The following rules must be strictly followed to obtain optimal air extraction:

Keep flexible tube duct short and straight.

Do not reduce the size or restrict the flexible tube duct.

When using the flexible tube duct always install the pipe pulled taut to
minimize pressure loss.

Failure to observe these basic instructions will reduce the
performance and increase noise level of the cooker hood.

Any installation work must be carried out by a qualified electrician or
competent person.

Do not connect the ducting system of the hood to any existing
ventilation system which is being used for any other appliance ,such
as warmer tube, gas tube , hot wind tube.

The angle of the bend of the flexible tube duct should not be less than
90 ° ; you must direct the pipe horizontally, or, alternatively, the pipe
should go up from the initial point and should be led to an outer wall.

After the installatio
n
, make sure that the cooker hood is installed
correctly to avoid grease collection at on end.
Ensure the flexible tube duct selected for installation complies with

relevant standards and is fire retardant.