How to
u
se the appliance
"SCHOTT" logo is only a supplier of glass parts
.
To ignite a burner:
o Press in the control knob of the burner that you wish to light and turn
it
anti-clockwise to the maximum position.
o If you keep the control knob depressed, the automatic ignition for
the
burner will operate.
o
o After this
5
-second interval, to regulate the flame you should continue
turning the control knob anti-clockwise until the flame is at a suitable level.
The operating position MUST be at a position between the maximum and
minimum position.
o To switch the burner off, turn the control knob fully clockwise to the gas
off
position.
o In case of
auto ignition
failure, the burners can be lit by carefully using a
gas lighter
.
You should hold down the control knob for
5
seconds after the flame on
the burner has lit. If after 15s the burner has not lit, stop operating the
device and open the compartment door and/or wait at least 1 min before
attempting a further ignition of the burner.
o
o
Only for FH-GS6020/6030 SVGL.
Burner ON，large flame
Burner ON，small flame
（saving mode）
Burner OFF
FH-GS6030
FH-GS6020
1
2
Summary of Contents for FH-GS6020 SVGL
Page 1: ...FH GS6020 SVSS FH GS6030 SVSS FH GS6020 SVGL FH GS6030 SVGL ...
Page 24: ......
