13
Conduit
Wire Connector
(not supplied)
Wire (unit side)
Wire (conduit side)
Range hood
Conduit
Range
hood
Nut
INSTALLATION (continued)
3. Connecting Power Supply Wires
WARNING
• Electrical wiring should be done by a qualified person(s) in accordance with all applicable
codes and standards, including fire-rated construction. An unqualified person doing the
work could result in fire, electric shock or injury.
• This range hood uses 120V AC. Do not connect to other voltage since fire, electric shock
or damage could result.
WARNING
• Be sure to switch power OFF at service panel
before wiring.
1
Remove the nut from the conduit connector
at the end of power wiring.
3
Connect wires tightly and securely using
wire connectors (not supplied).
Connect the electrical wires as follows:
• Black to Black
• White to White
• Green to Green
4
Make sure that all wires are connected
properly and enclosed inside of the
wiring compartment.
2
Connect the conduit through the connecting hole
of the body using the nut previously removed.
Conduit
(Not supplied)
Power
wiring
Nut
(Not supplied)
