12
INSTALLATION (continued)
2. Range Hood Mounting
CAUTION
• Wear working gloves to avoid injury.
1
Referring to “DIMENSIONS” on page 5, insert 4
washer head wood screws into the bottom plate of the
cabinet. Marking before screwing is recommended.
Allow about ¼" between the bottom plate and
screwheads for hanging the hood body.
Note
Please use suitable accessories during installation (refer to page 4).
May add or opt for other accessories as reinforcement when necessary.
2
While inserting the duct joint into the
duct end, hook the temporary fixing
holes of the body on the screws, then
slide the body backward until the
screws are engaged in narrow end of
the holes.
3
After ensuring that the range hood
is positioned properly, tighten the 4
screws and fix it firmly using 2 more
washer head wood screws.
4
Make the duct joint secure and air-
tight using non-flammable tape such
as aluminum tape, etc. (not supplied)
Temporary
fixing hole
Washer head
wood screw
Duct tape, etc.
Duct
