background image

1

OFI-FTTx Active ONT Detector 

Quick Reference Guide

General Information

The OFI-FTTx is a rugged, handheld optical fiber identifier designed to 
identify the presence or absence of an active Optical Network Terminal (ONT) 
on FTTx F2 fibers at the Fiber Distribution Hub (FDH). During a test the F2 
fiber does not have to be removed from service. Thus the OFI-FTTx can 
verify whether a splitter pigtail at the FDH is connected to an active circuit 
before it is disconnected for fault location or re-use. The OFI-FTTx can help 
verify FTTx network records and recover splitter pigtails and F2 fibers that 
are connected at the FDH but, in fact, are available for new customers. 
Please check our web site at 

www.AFLtele.com/go/Noyes

 for updates to 

this Reference Guide and additional application information. If you have any 
questions about your OFI-FTTx, or if you need technical or sales support, 
please contact Noyes Customer Service.

Contacting Customer Service

You may call Noyes Customer Service between 8 AM and 5 PM, United 
States Eastern Time.
Phone  800-321-5298
 

603-528-7780

Fax 

603-528-2025

Mail 

[email protected]

Noyes OFI-FFTTTx Specs

Provided by www.AAATesters.com

Summary of Contents for AFL OFI-FTT Series







Reviews: