13
12
1
2
3
4
5
Method of usage
Method of usage
（1）
（2）
·
Foldable pillow pad. The users can choice the number of layer to find the best
intensity of back massage.
·
Separate the head pillow to fall down to the back to reduce the intensity of back
massage.
·
Backrest cushion and backrest connected byzipper (1), head cushion and
backrest pad connected by thread gluing (2)
Zipper
Thread gluing
5. Head cushions and backrest pad's dismounting and use manual
4.Calf installation
·
Use the Allen wrenches lock two hexagon socket head screws. (chart5).
·
The install hole of rail shelf (chart 1).
·
Place the isolation sleeve on both sides of the calf hook. (Outside) (chart2).
·
Place the flat washer into the pin shaft. (chart3).
·
Calf hooks install hole and rail shelf install hole should be aligned, insert the pin
with a flat washer(both sides are required to be inserted). The pins are aligned with
the screw holes for easy installation. (chart4).
POWER INPUT
FUSE: T5AL 250V
CONTROLLER JACK
ON/OFF
Diagram of the switch position of power supply
Power switch method map
3.Turn off power, stop massage
1) Press power button during massage progress, all massage function will be stop
immediately, the backrest and footrest will return to original position automatically,
meanwhile you can set up memory function. After rated working time, all
massage functions will be finished, meanwhile you can set up memory function,
but backrest and footrest won't return to original position.
2) Memory store function: After rated working time or switch off, the hand controller
displays "Memory" and glitter
（
The display will prompt 1, 2, 3, if you want to store
a memory mode, just stay in this mode for two seconds until the hand controller
alarming "Di".
）
, remind the users whether need to store the massage mode
before turn off.
3) Cut off the power of the whole machine. Figure (Switch power off)
