FujiFilm X-T30, Owner'S Manual

Page: 276 / 320

256
C
onnec
tions
11
6 Copy pictures to your computer.
•
Image transfer : Use MyFinePix Studio or applications provid-
ed with your operating system.
•
RAW conversion : Process RAW images using FUJIFILM X RAW
STUDIO. The power of the camera’s image processing en-
gine is used for rapid processing.
•
Saving and loading camera settings : Use FUJIFILM X Acquire to save
or load camera settings. Save your preferred settings to a fi le
in a single operation and copy them to multiple cameras.
O •
Turn the camera off before disconnecting the USB cable.
•
When connecting USB cables, be sure the connectors are fully in-
serted in the correct orientation. Connect the camera directly to the
computer; do not use a USB hub or keyboard.
•
Loss of power during transfer could result in loss of data or damage to
the memory card. Insert a fresh or fully-charged battery before con-
necting the camera.
•
If a memory card containing a large number of images is inserted, there
may be a delay before the software starts and you may be unable to
import or save images. Use a memory card reader to transfer pictures.
•
Make sure that the indicator lamp is off or lit green before turning
the camera off .
•
Do not disconnect the USB cable while transfer is in progress. Failure
to observe this precaution could result in loss of data or damage to
the memory card.
•
Disconnect the camera before inserting or removing memory cards.
•
In some cases, it may not be possible to access pictures saved to a
network server using the software in the same way as on a stand-
alone computer.
•
Do not immediately remove the camera from the system or dis-
connect the USB cable once the message stating that copying is in
progress clears from the computer display. If the number of images
copied is very large, data transfer may continue after the message has
ceased to be displayed.
•
The user bears all applicable fees charged by the phone company or
Internet service provider when using services that require an Internet
connection.