Quick Start Guide to the Vevo 770
®
Rev. 1.7
Page
2
4.
The Vevo 770 software should automatically launch. If not, double-click on
the Vevo desktop icon
or select Start > All Programs > VSI >
Vevo 770 > Vevo 770 V2.0.0
Start the Vevo Software
1.
Select the Measurement package to be used.
2.
Select the appropriate RMV scanhead to be used. To view the properties of
the selected scanhead, click View Properties to expand the Scanhead
Selection dialog.
To initialize the selected scanhead, click Initialize.
Initialization sets up the appropriate software parameters for the selected
RMV scanhead.
Click Cancel or press <Esc> to exit the software startup process.
3.
Once a scanhead is initialized, the Study Browser is displayed. The Study
Browser is used for data acquisition and for the review and analysis of
study data.
4.
Click New or press <New> and fill out at least the two mandatory study
information fields – Operator Name and Study Name.
5.
Click OK to continue with the study. The Vevo 770 will automatically start
acquiring data in B-Mode.
B-Mode
1.
Select Setup > B-Mode Setup, or press <Mode Setup> to change
acquisition parameters.
2.
Press <Scan/Freeze> to start and stop data acquisition. The acquired data
may be reviewed using the cine loop controls at the bottom of the screen.
Optional Acquisition Modes
The following imaging modes are available as options to the Vevo 770. You will
only be able to use the options that have been purchased with your system:
