FujiFilm UA107x88.4BESM-T35, Operating Manual

Page: 31 / 90

PRIOR TO USE
- v -
■Selection of Camera
The behavior of the intercom select switch in an accessory differs by types of camera. If required, change the
setting of dip switch (S710-7) on the A-board in the lens according to the type of camera.
At the factory, the switch is set to “TYPE 1.”
The circuits relative to the dip switch are shown below.
Note. If the camera is of TYPE 2, set the intercom select switch on the camera side to “PD.”
At the position of “ENG,” “PD” can not be selected from a zoom rate demand unit.
Setting of Dip Switch (S710-7)
OFF: Camera Type 1
ON: Camera Type 2
1
2
3
4
5
6
7
8
O
N
Ⅰ. TYPE 1 CAMERA: BVP-270 series (NTSC) and BVP-370 series (NTSC)
INCOM 1 SW
ENG
PD
ACCESSORY
(EX. ERD-5A-D01/ERD-5A-D11)
LENS
Ⅱ. TYPE 2 CAMERA: BVP-370 series (PAL)
INCOM SETTING LINE
ENG
PD
ACCESSORY
(EX. ERD-5A-D01/ERD-5A-D11)
LENS
INCOM 2 SW
CAMERA
INCOM (1) SW
CAMERA
A-BOARD
A-BOARD
S710