4
Precautions for Use
Operating Environment
• The camera can be used at temperatures of from −10 to +50 °C (temperatures below freezing are only supported if the power
supply is not interrupted) and at humidities of from 10 to 80% (no condensation).
• Prolonged use at high temperatures or humidities could degrade components, shortening product life.
• Do not install the product where it will be exposed to solvents or other chemicals.
Installation
• Do not install cables in close proximity to cables for fl uorescent lights or other electrical devices. Failure to observe this precau-
tion could impair sound or image quality. Move the cables if signal quality is aff ected.
• Using the product in close proximity to powerful electromagnetic fi elds, such as those produced by television transmitter an-
tennas, electric motors, or transformers, could result in distorted or wavy pictures. Should this occur, use steel cable shielding.
• Plastic cable insulation may sometimes be damaged by crows or other birds. Protect cables using a cable conduit.
• Fix cables in place so that they are not subject to repeated vibration, friction, or tugging. Failure to observe this precaution
could cause the cable to break.
• Install the product base down.
Use
• Do not aim the lens directly at the sun or other bright light sources or refl ections. Failure to observe this precaution could result
in deterioration of the image sensor color fi lter, aff ecting picture color.
• Do not subject the product to strong physical shocks or vibration. Failure to observe this precaution could result in product
malfunction.
• Clean the product with a soft, dry cloth. Never use chemically-treated cloths or solvents such as benzine (petroleum ether),
thinner, or alcohol. Failure to observe this precaution could cause warping or discoloration.
Network Settings
• You will need to supply an IP address, subnet mask, and gateway IP address.
• The frame rate may drop if multiple streams are transmitted via unicast.
• When connected to multiple devices, the product will transmit data to all devices at the rate supported by the device with the
slowest receiving rate.
