Fuji IP-10 Digital Passport System: Quick Reference Guide
20. Make sure you are shooting on
a flat surface that is colored white
or evern very light gray and that it
is non-reflective.
21. Position the subject, sitting
upright, directly in front of the
background. Place the camera
about 4 feet from the subject.
19. The EASY-B mode will tell you to
take your images, then with the
camera plugged into the printer,
press the MENU/OK button. This
allows you to select which images
you want to print.
23. You may need to use the flash to
ensure as little shadow behind the
person as possible.
24. Ensure the camera is plugged
into the printer. Press the PRINT
button if using EASY-A mode. The
printer downloads the photos &
begins to make the prints. Do not
disturb the paper tray.
22. Use the zoom controls to make
the top of the head and the chin fill
up and touch the edges of the
onscreen shooting guide outline.
Press the exposure button to take
the picture.
26. If using the EASY-B mode: press
the MENU/OK button to download
images to the printer. Use the
cursor right or left arrows to choose
the image that you want to print.
27. Press the MENU/OK to select.
Next you’ll see a proof of how your
print will look. Press the PRINT
button to begin printing.
25. Make sure there is AT LEAST 8
inches of clearance behind the
printer. Each sheet takes about 90
seconds to print. When done, you’ll
have 2 identical photos, ready for
you to trim them down to 2” x 2”
Copyright 2011 CFS Products, Inc. All rights reserved.
Summary of Contents for IP-10
Page 1: ......
