37
EN
TROUBLE SHOOTING
Printed pictures
Problem
Possible Causes
Solution
The correct date is not
printed.
●
The date setting is not correct.
●
Perform date setting again. (Page 32)
Part or whole finished
print is white.
●
The fi lm door was opened before all
the fi lm was used.
●
Do not open the fi lm door until you have used up
all the fi lm. Otherwise, the rest of the fi lm may be
exposed and unsuitable for use.
The picture is blurred.
①
Pressure was applied to the picture
immediately after it came out from
the printer.
②
The picture did not come out easily.
①
Do not shake, bend, fold, or press the print.
②
Do not cover the fi lm ejection slot.
A black line is printed
on the bottom of the
finished print.
●
The camera shakes or has been
dropped and the fi lm has become
misaligned.
●
Print the image again. If this does not solve the
problem, load a new fi lm pack.
Using the Reset Button to Reset the Camera
If the camera does not work properly, use the reset button to reset the camera.
Open the card slot cover to access to the reset button.
RESET
Press the reset button using the tip of a ballpoint pen or something similar.
instax̲BO-14̲14lang.indb 37
instax̲BO-14̲14lang.indb 37
8/8/2018 5:52:05 PM
8/8/2018 5:52:05 PM
