31
EN
TROUBLE SHOOTING
Problem
Possible Causes
Solution
The film pack cannot
be loaded, or cannot be
loaded easily.
①
The fi lm pack is not for your camera.
②
The fi lm pack is not being loaded
correctly.
①
Use FUJIFILM Instant Film “instax SQUARE” only.
(No other fi lms can be used.)
②
Match the yellow line on the fi lm pack with the
yellow positioning mark in your camera.
The film cover cannot
be ejected.
●
The camera cannot recognize the
fi lm pack.
●
Remove the fi lm pack and load it again.
The film cannot be
ejected to the end.
●
The camera shakes or has been
dropped and the fi lm has become
misaligned.
①
Grasp the edge of the fi lm and pull it out.
②
Performing another printing operation pushes
the jammed fi lm out.
The film pack cannot be
ejected.
①
The camera shakes or has been
dropped and the fi lm is misaligned.
②
The fi lm has been jammed.
①
Load a new fi lm pack.
②
Turn the camera off and on again. If this does not
solve the problem, remove the jammed fi lm and
load a new fi lm pack.
Printed pictures
Problem
Possible Causes
Solution
The correct date is not
printed.
●
The date setting is not correct.
●
Perform date setting again. (Page 26)
Part or whole finished
print is white.
●
The back cover was opened before
you used up all the fi lms.
●
Do not open the back cover until you have used
up the fi lm; otherwise, the rest of the fi lm may be
exposed and ruined for use.
The picture is blurred.
①
Pressure was applied to the picture
immediately after it came out from
the printer.
②
The picture did not come out easily.
①
Do not shake, bend, fold, or press the print.
②
Do not cover the fi lm ejection slot.
A black line is printed
on the bottom of the
finished print.
●
The camera shakes or has been
dropped and the fi lm has become
misaligned.
●
Print the image again. If this does not solve the
problem, load a new fi lm pack.
instax_D-SQ_6lang.indb 31
instax_D-SQ_6lang.indb 31
2017/2/20 14:12:15
2017/2/20 14:12:15
