13
IMPORTANT SAFETY NOTICE
This product has been designed to ensure the safety of the user
when handled correctly, and in accordance with the User’s
Guide and the instructions provided� It is important that both
the product and the “instax SQUARE” Film are handled properly
and used only to print pictures as instructed in the User’s Guide
and in the “instax SQUARE” Film instructions� For future
reference keep the User’s Guide in a safe, easy to find place�
WARNING
This symbol indicates danger, which could result in injury or death.
Please follow these instructions.
WARNING
If any of the following instances occur, immediately unplug
the USB Type-C cable, turn the printer off and cease use�
• The printer becomes hot, emits smoke, emits a burnt smell or
is functioning abnormally�
• The printer is dropped into water or any foreign objects enter
the printer�
This device contains a built-in battery� Do not subject to heat,
throw it into an open fire, drop or subject to impact� Doing so
could cause the printer to explode�
WARNING
Never attempt to take this product apart� You may be injured�
If the printer is not functioning correctly, to avoid injury do
not attempt to repair yourself�
If this product is dropped or damaged so that the internals are
visible, do not touch it� Contact your FUJIFILM dealer�
Do not touch any parts within the inside of the back cover�
This may cause injury�
Never get this product wet or handle it with wet hands� Doing
so may result in an electric shock�
Promptly unplug the USB Type-C cable once battery is fully
charged�
Keep out of the reach of small children� This product could
cause injury in the hands of a child�
The “CE” mark certifies that this product satisfies the
requirements of the EU (European Union) regarding
safety, public health, environment and consumer
protection. (“CE” is the abbreviation of Conformité
Européenne.)
Hereby, FUJIFILM declares that the radio equipment type “FI017W”
is in compliance with Directive 2014/53/EU.
For more information, access the website below.
https://instax.com/square_link/en/spec.html
The “UKCA” mark certifies that this product satisfies the
requirements of Great Britain (England, Scotland, Wales)
regarding safety, public health, environment and
consumer protection.
*UKCA: UK Conformity Assessed.
Simple printer care
■
Handling the printer and battery
• CAUTION - Do not expose to excessive heat such as sunshine,
fire or the like. This can result in an explosion or the leakage of
flammable liquid or gas during use, storage, transportation or
disposal.
• CAUTION - Do not dispose of a battery into fire or a hot oven. Do
not mechanically crush or cut the battery. This can result in an
explosion.
• CAUTION - Do not subject to extremely low air pressure at high
altitude, this may result in an explosion or the leakage of
flammable liquid or gas.
■
Printer care
1.
Do not open the film door until all film exposures have been
used, doing so will prematurely expose the remaining film
and render it unusable�
2. Your printer is a fragile object. Do not expose it to water, sand
or gritty materials.
3. Do not use solvent such as thinner or alcohol to remove dirt.
4. Keep the film chamber and printer interior clean to avoid
damaging the film.
5. Do not leave your printer in direct sunlight or hot places such
as the inside of a car. Do not leave the printer in damp places
for prolonged periods.
6. Moth repellent gas such as naphthalene may affect your
printer and prints. Take care to keep your printer and prints in a
safe, dry place.
7. Note that the temperature range within which your printer can
be used is +5°C to +40°C.
8. Take great care to ensure that printed materials do not violate
copyright, image rights, privacy or other personal rights and
do not offend public decency. Actions that violate the rights of
others, are contrary to public decency or constitute a nuisance
may be punishable by law or otherwise legally actionable.
9. This printer is designed for domestic/personal use. It is not
suitable for commercial use.
■
Charging the Battery
• The battery is not fully charged during manufacture. Please
charge the battery fully before first use.
• Charge the battery using the supplied USB Type-C cable.
Charging times will increase at ambient temperatures below
+10°C or above +35°C.
• Do not attempt to charge the battery at temperatures above
+40°C or at temperatures below +5°C as the battery will not
charge.
■
Battery Life
At normal temperatures, the battery can be recharged about 300
times. A noticeable decrease in the length of time the battery will
hold a charge indicates that it has reached the end of its service
life.
■
Caution: Handling the battery
The battery and printer body may become warm to the touch after
extended use. This is normal.
