34
EN
TROUBLE SHOOTING
During operation
Problems
Possible Causes
Solutions
The shutter release
won’t trip.
1
The battery power is low.
2
The batteries are not loaded
correctly.
3
Power is not turned on.
4
Camera has remained idle for
roughly 5 minutes with the
power turned on.
1
Replace the batteries with new ones.
2
Load the batteries correctly.
3
Press the power button to turn on the power.
4
Press the power button after retracting the lens
or press the shutter release button to restore the
power-on state.
The lamp on the view
finder blinks and the
shutter release won’t
trip.
●
Flash is charging.
●
Wait until the lamp on the brightness adjustment
dial is lit without blinking.
The film pack won’t
load into your camera,
or won’t load into your
camera smoothly.
1
The film pack is not for your
camera.
2
You are not loading the film pack
correctly.
1
Use FUJIFILM INSTAX mini film only. (No other
films can be used.)
2
Match the yellow line on the film pack with the
yellow positioning mark in your camera. Follow
the INSTAX mini film pack instructions.
