FujiFilm FUJINON XA22x7BES-D8, Operating Manual

Page: 40 / 76

EFP-58(B)_ E
- 12 -
◎ Return Switch
Settings of Function & Mode
Select Switches
1-③
RET → Q・Z
1-⑤
C・Ｚ ON
Function of Return Switch
OFF － Return Switch
ON ON Auto Cruising Zoom Switch
ON OFF Quickzoom Switch
◎ VTR Switch
Settings of Function & Mode
Select Switches
1-②
VTR → Q・Z
1-⑤
C・Ｚ ON
Function of VTR Switch
OFF － VTR Switch
ON ON Auto Cruising Zoom Switch
ON OFF Quickzoom Switch
■ About Setting of VTR Switch and Return Switch
The functions of the VTR switch and the return switch on a zoom rate demand unit (Ex. ERD-10A-D05A) can be
changed to other functions by combination of the settings of the function & mode select switches. Refer to the
following tables.
■ About Auto Cruising Zoom Operation
The auto cruising zoom operation can be performed using a zoom rate demand unit (Ex. ERD-10A-D05A) linked to
the lens. In the auto cruising zoom operation, the zoom moves to the tele end or the wide end at a constant speed.
This function is effective when a constant slow zoom speed is required across the zooming range.
■ About Quickzoom Operation
The quickzoom operation can be performed using a zoom rate demand unit (Ex. ERD-10A-D01) linked to the lens. In
the quickzoom operation, pressing a switch moves the zoom to the tele end quickly. The operator can use this
function in such occasions listed below.
・ When rapid zooming to the tele end is required to focus on the object precisely.
・ To confirm, in a moment, the composition of the image in the extreme closeup shot.