FujiFilm FinePix Z 2, Owner'S Manual

Page: 31 / 61

61
Advanced
Features
3
60
5
When transmission is completed,
“TRANSMISSION COMPLETED” appears on the
LCD monitor. After that, picture comes out from the
printer.
●
!
When [COMMUNICATION ERROR] appears, press the
“MENU/OK” button to resend the image data or press the
“DISP/BACK” button to cancel the printing.
●
!
Check that your printer is turned on when transmitting the
image data.
●
!
Do not place anything between a camera and a printer.
●
!
Leaving the printer in direct sunlight or directly under
fluorescent lighting may prevent successful data transfer.
●
!
If the printer is close to infrared communication devices (such
as remote controller of TV or video) or devices that generate
electrical noise, it may prevent successful data transfer.
●
!
Fix the camera’s infrared port on the front of the printer’s
infrared port during transmitting the image data.
●
!
In “3:2” quality setting, depending on the printer
specifications, white streaks may appear at the top and
bottom of the image.
●
!
Movie images cannot be printed.
●
!
Images photographed with a camera other than FinePix Z2
may not be printed.
4
Press the “MENU/OK” button to begin
transmission. Transmitting time is about 20
seconds.
●
!
Image data is converted to 0.3 M when transmitting it.
CANCEL CANCEL
TRANSMITTING IMAGE DATA TRANSMITTING IMAGE DATA
TRANSMISSION COMPLETED TRANSMISSION COMPLETED
1 1 Press the “MENU/OK” button to display the
menu on the LCD monitor.
2 Press “ a ” or “ b ” to select “
Ü
” PRINT WITH MP.
Turn the printer on.
1
2
SET SET
PRINT WITH PRINT WITH MP MP
0 1 0 2
2 1
Press “
c
”.
2 Press “ d ” or “ c ” to select the printing frame
(file).
0 1 0 2
You can send photographed images to a FUJIFILM printer with infrared transmission function. Refer
to the instruction manual of the printer for information on using printer.
FUJIFILM mobile printer (MP series) supports the infrared transmission data printing. Operation cannot
be guaranteed when infrared transmission printers other than those manufactured by FUJIFILM are
used.
3
Face the camera’s infrared port on the front of the printer’s infrared port. Transmission distance
is about 5 to 10 cm within 15° difference.
●
!
Adjust the direction of infrared port when attaching the camera on the cradle.
15˚
15˚
5-10 cm
(Angle: up to 15°)
Ü
PRINTING BY FUJIFILM MOBILE PRINTER
PLAYBACK MENU
T R A N S M I T I M A G E D ATA O K ? T R A N S M I T I M A G E D ATA O K ?
S E T S E T C A N C E L C A N C E L