98
Tr
o
u
b
le
sh
o
o
ti
n
g
Troubleshooting
Power and Battery
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Power
supply
The camera does
not turn on.
The batteries are exhausted.
Insert fresh or fully-charged spare batteries.
8
The batteries are not in the correct orienta-
tion.
Re-insert the batteries in the correct orienta-
tion.
8
The battery-chamber cover is not latched.
Latch the battery-chamber cover.
9
The AC adapter and DC coupler are not con-
nected properly.
Make sure that the AC adapter and DC coupler
are properly connected.
—
The camera has been left for an extended
period with no batteries inserted and the
AC adapter/DC coupler unplugged.
After inserting the batteries or connecting the
AC adapter/DC coupler, wait a few moments
before turning the camera on.
—
The batteries run
down quickly.
The batteries are cold.
Warm the batteries by placing them in a pocket
or other warm place and re-insert them in the
camera immediately before taking a picture.
v
There is dirt on the battery terminals.
Clean the terminals with a soft, dry cloth.
—
The camera is in
M
mode.
Select another shooting mode.
13, 32
The batteries are new, have been left unused
for an extended period, or have been re-
charged without fi rst being fully discharged
(rechargeable Ni-MH batteries only).
Discharge Ni-MH batteries using the
P
DIS-
CHARGE
option and recharge them in a bat-
tery charger (sold separately). If the batteries
do not hold a charge after repeated discharg-
ing and recharging, they have reached the end
of their service life and must be replaced.
94
E
HIGH SPEED SHOOTING
is on.
Turn
E
HIGH SPEED SHOOTING
off to re-
duce the drain on the battery.
—
u
CONTINUOUS AF
is selected for
F
FOCUSING
.
Select a diff erent focusing option.
73
The camera turns
off suddenly.
The batteries are exhausted.
Insert fresh or fully-charged spare batteries.
8
The AC adapter or DC coupler has been dis-
connected.
Make sure that the AC adapter and DC coupler
are properly connected.
—