FujiFilm FinePix S1 Pro Page 96 Owner'S Manual Download

Page: 96 / 132

Press “

” or “

” on the 4-direction button to select

“REVIEW/CANCEL”.

Press the “MENU/EXE” button.

You can check only the frames for which prints are
specified by pressing “

” or “

” on the 4-direction

button. To cancel the DPOF settings, display the image
and then press the “MENU/EXE” button.

• If there are no images with DPOF settings, no images are displayed.
• Images are arranged in the order in which the DPOF settings were

specified.

• If an image with DPOF settings contains an error or if the DPOF settings

were specified on a different device, a confirmation message appears.
Check the message and then press the “MENU/EXE” button to cancel the
settings or the “CANCEL” button to cancel the procedure.

• Pressing the “MENU/EXE” button cancels the DPOF settings for the

specified image.

• To cancel the procedure, press the “CANCEL” button.

DPOF Settings - continued

Summary of Contents for FinePix S1 Pro





































































































































Search results

Summary of Contents for FinePix S1 Pro

Reviews:

Related manuals for FinePix S1 Pro

Brands by name

Popular brands

FujiFilm FinePix S1 Pro, Owner'S Manual

Search results

Summary of Contents for FinePix S1 Pro

Reviews:

Related manuals for FinePix S1 Pro

Brands by name

Popular brands