FujiFilm FinePix S1 Pro Page 2 Owner'S Manual Download | Manualshive

Page: 2 / 132

background image

2

Warning

This symbol is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the
appliance.

For customers in the U.S.A.
FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.

CAUTION

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your warranty.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The graphical symbols are located on the bottom
of the case.

To prevent fire or shock hazard, do not expose the unit to rain or
moisture.

«
1
2
3
4
...
»

Summary of Contents for FinePix S1 Pro





































































































































Reviews:

No comments

Related manuals for FinePix S1 Pro

Brand: Canon Pages: 49

Brand: Camatics Pages: 11

Brand: Samsung Pages: 34

Brand: Samsung Pages: 34

Brand: Samsung Pages: 139

Brand: Samsung Pages: 123

Brand: Samsung Pages: 12

Brand: Samsung Pages: 126

Brand: Samsung Pages: 106

NV10 - Digital Camera - Compact

Brand: Samsung Pages: 74

DMC-GH1K - Lumix Digital Camera

Brand: Panasonic Pages: 200

TL220 - DualView Digital Camera

Brand: Samsung Pages: 110

Brand: Samsung Pages: 64

Brand: Samsung Pages: 38

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 189

Brand: Panasonic Pages: 195

Brand: Panasonic Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands