Preparation Before Use
7
How to install the Back Pad and the Pillow.
Install the Back Pad on the zipper of the back-rest. Install the Pillow on the Velco tape of the Back Pad.
1. Install the Back Pad.
2. Install the Pillow.
When massaging, place the pillow behind.
If you feel massaging strength strong, use the pillow.
When not massaging, use the chair as the recliner with the back pad and the pillow installed.
Before use, tuck up the back pad to make sure that there is no tear on the cover cloth of the
back-rest and on the other parts. (Should there be any tear, no matter how small it is,
discontinue using the chair immediately, disconnect the power cord plug, and ask for repair.)
Continued use with the cloth torn may cause electric shock or any hazard on the body.
Installation of the Remote Controller Stand.
* The Remote Controller Stand is designed to be installed at the left side. Should it need to be
installed at the right side, take the procedure as detailed in the next page.
1. Put the cap on the arm
unit on the right-side
arm-rest.
*
The Remote Controller Stand
can be installed either at the
right side or at the left side.
2. Fix the Remote
Controller Stand on
the arm unit on the
left-side arm-rest with
the mounting screws
at 2 places.
3. Finish up the work by
installing the cap
(open).
[How to adjust the Remote
Controller Holder]
Loosen the fixing screw to a
desired position, and fix it
tightly.
[How to install or remove
the Remote Controller]
Installation:
Push it down
from upward.
Removal:
Pull it up
upward.
[View of the finished work]
Get a piece of
string through
the Remote
Controller
Stand to hang
down the
Quick
Operation
Manual.
To remove the Remote Controller
stand, reverse the order of
installation.
Make sure to install the Remote Controller Stand securely.
Otherwise, it could cause injury or mechanical trouble if
the stand has dropped off accidentally.
Back Pad
Zipper
Pillow
Velco tape
Cap
Right side
Left side
Left side
Mounting
screw
Cap (open)
Remote Controller
Holder
Tightening
Loosening
Fixing screw
Request
CAUTION
Hexagonal
wrench
WARNING
Remote Controller Stand
