How to Use the AUTO-COURSE
16
Introduction
After turning the power ON, the LCD in the
initial stage displays the screens as shown
on the right side alternately.
When changing from an AUTO-COURSE to
another AUTO-COURSE, or when changing
non-AUTO-COURSE massage to any
AUTO-COURSE option (see Page 51).
1. Press the [START/RESET] button.
Foot-rest goes up automatically to the standby position.
(To interrupt on the way, press the [STOP] button.)
The standby screen comes out.
Be deeply seated on the chair, and
recline yourself slowly with your
head on the back-rest.
2. Press the [AUTO] button. Or, select
“
AUTO
”
with
the button, and press the [ENTER] button.
All of the AUTO-COURSE options
are displayed.
*
The [ENTER] button remains not
to be pressed. Even so, all the
options are displayed 5 seconds
later. (The same holds good of this
procedure.)
3. Select a desired course with the button or
the [AUTO] button, and press the [ENTER] button.
Select one out of the 4 courses of
“
WHOLE BODY
”
,
“
SHOULDER
”
,
“
WAIST
”
and
“
7MIN
”
.
There are 4 sub-courses in the
“
WHOLE BODY
”
course,
and 3 sub-courses in the
“
SHOULDER
”
and,
“
WAIST
”
course each.
STOP
START
/RESET
AUTO
FUNCTION
AIR
REPEAT
SKIP
SHDR
MENU
ARM
ENTER
FOOTREST
RECLINER
RESET
HEIGHT
ADJUSTMENT
W/H
LEG
FORWARD
BACK
