70
h
The flash fired in close-up photography.
Images of subjects shot
in close-up mode are too
bright.
h
Remove the batteries, re-insert them
and try again.
h
Replace the new alkaline batteries.
h
Camera malfunctions.
h
The batteries are exhausted.
Nothing happens when
you use the camera
buttons and switch.
h
Remove the write-protection (Peel off
the write-protect sticker).
h
The SmartMedia is write-protected.
I cannot format the
SmartMedia.
h
Set to TV input to “video”.
h
The TV input is incorrect.
There is no picture on TV
h
Connect the camera to the PC with the
USB cable and select [My Computer]
/
[Control Panel]
/
[System]
/
[Device
Manager]. In the Device Manager
window, delete [Composite USB device]
or [Unknown device] in [Other devices].
Then disconnect the camera and install
the software before reconnecting the
camera to the PC.
h
Connect the camera directly to the PC
using the USB cable, not via a USB
hub.
h
Disconnect the other USB devices
conneted to the PC.
h
Connect the camera to the PC with the
USB cable before installing the software.
The PC does not
recognize the camera.
Problem
Cause
Remedy
h
Set to the
s
flash-off mode.
h
Use the tripod, or set to the flash mode.
h
Set the shooting distance selector
switch to
j
normal mode.
h
The camera or subject was moving when
the shot was taken.
h
You photographed a distant subject with
the
p
close-up mode.
The image is blurred.
