Wireless Remote Controller YB1F2
4
3 Introduction for special function
●
About X-FAN function
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is
stopped to avoid mould.
(1) Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor
fan will continue running for about 10 min. at low speed. In this period, press X-FAN button
to stop indoor fan directly.
(2) Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the
complete unit will be off directly.
●
About AUTO RUN
When AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD,
the unit will be in accordance with the room temp. automatically to select the suitable running
method and to make ambient comfortable.
●
About turbo function
If start this function, the unit will run at super-high fan speed to cool or heat quickly so that the
ambient temp. approachs the preset temp. as soon as possible.
●
About lock
Press +and - buttons simultaneously to lock or unlock the keyboard. If the wireless remote
controller is locked, the icon will be displayed on it, in which case, press any button, the mark will
flicker for three times. If the keyboard is unlocked, the mark will disappear.
●
About switch between Fahrenheit and Centigrade
Under status of unit off, press MODE and - buttons simultaneously to switch
o
C and
o
F.
●
About new function of defrosting
It indicates: after starting this function by wireless remote controller and the unit has been under
defrost status, If turn off the unit by wireless remote controller, the unit will not stop defrosting until it
is finished; if change setting mode by wireless remote controller, the function ,which is set last time,
won't be carried out until defrosting finished.
Operation of this function on or off: If wireless remote controller is under off status, press mode
button and X-FAN button simultaneously in order to enter or cancel this new function. If the unit
is under defrost mode, dual eight position on wireless remote controller will display H1.If switch to
heat mode, the position will display H1, which flickers for 5s, in which case, press +/- button, H1 will
disappear and setting temp. be displayed.
After wireless remote controller is powered on , the new defrost function will be defaulted to be
closed.
4 Replacement of batteries
1
Slightly press the place with along the arrowhead direction and push the back cover of
the wireless remote controller.
2
Take out the used batteries.
3
Insert two new AAA 1.5V dry cell batteries and pay attention to their polarity.
4
Put back the cover of the wireless remote controller.
Summary of Contents for YB1F2
Page 8: ......
